Spectral range 

190.0-1100.0 nm

Spectral width of the slit 

1nm (190 - 1100 nm)

Optical circuit 

Two-beam

Accuracy of wavelength display 

  Step 0.1 nm

Accuracy of wavelength setting 

0.1 nm

Wavelength setting error 

± 0.1 nm at 656.1 nm D2

± 0.3 nm (190 - 1100 nm)

Wavelength reproducibility

± 0.1 nm

Scan speed

ca. 6000 nm/min

Wavelength registration

ca. 10 bis 3000 nm/min

Changing the light source

Automatic

Scattered light 

Less than 0.02% (220.0 nm NaI, 340.0 nm NaNO2), Less than 1.0% (198 nm KCL)

Photometric range

Absorption: -4 ~ 4 Abs

Skip: 0 ~ 400%

Photometric accuracy 

± 0.002 Abs (at 0.5 Abs)

 ± 0.004 Abs (at 1.0 Abs) 

± 0.006 Abs (at 2.0 Abs)

Photometric reproducibility

Less than ± 0.001 Abs (at 0.5 Abs) Less than ± 0.001 Abs (at 1.0 Abs) Less than ± 0.003 Abs (at 2.0 Abs)

Stability

0.001 Abs/Std max. (bei 700 nm)

Deviation

0.002 Abs max. (190 bis 200 nm) - 0.001 Abs max. (200 bis 1100 nm)

Noise

P-P 0.002 Abs max., RMS 0.0002 Abs max.* (bei 700 nm)

Light source

Halogen lamp (2000 hours), Deuterium lamp, automatic position setting and adjustment at maximum sensitivity.

Detector

Silicon photodiode

Display

6-inch LCD (320 x 240 pixel) with brightness adjustment

Drift

Less than 0.0003 Abs / h, 700 nm (after heating for 1 h)

Baseline deviation

lines ± 0.0006 Abs (190 - 1100 nm, after heating for 1 h)

Noise level

Less than 0.00005 Abs, RMS, 700 nm

Memory for storing data without a PC 

Built-in (up to 24 files) + external USB drive (optional)

Device control 

At the choice of the operator: from the built-in processor or from the personal computer

Power

110 V / 60 Hz or 220 V / 50 Hz

DC voltage measurement 

200 mV, 2 V, 20 V, 200 V, 1000 V 

DC measurement 

200 mA, 2 mA, 20 mA, 200 mA, 2 A, 10 A

AC voltage measurement 

True-RMS, 200 mV, 2 V, 20 V, 200 V, 750 V

AC measurement 

True-RMS, 20 mA, 200 mA, 2 A, 10 A

Measurement of resistance (on the 2- and 4-wire circuit) 

200 Ohm, 2 kOhm, 20 kOhm, 200 kOhm, 2 mOhm, 10 mOhm, 100 mOhm

Capacity measurement 

2 nF, 20 nF, 200 nF, 2 μF, 20 μF, 200 μF, 10,000 μF

Conductivity test 

range of 2 kOhm

Diode test 

Range 0 - 2 V

Frequency measurement 

20 Hz ~ 1 MHz

Period measurement 

1 μs ~ 0.05 s

Temperature measurement 

thermocouple support, RTD temperature sensor

Max. input voltage 

1000 V

Interfaces 

USB Device, USB Host, LAN, GPIB

Bandwidth

200 MHz

Channels

2 + 1 external.

Sampling frequency

1 GS / S

Max. memory depth

14 MB / channel (one channel); 7 MB / channel (two channels)

Oscillogram capture rate

400,000 RPM (segmented sampling mode)

Start types

Edge, Slope, Pulse, Window, Runt, Interval, Time out (Dropout), Pattern, Video

Vertical sensitivity

500 µV/div - 10 V/div

Mathematical operations

addition, subtraction, multiplication, division, FFT, differentiation, integration, square root extraction

FFT (processing)

1 M points

Automatic measurements

38 types: statistics calculation, zoom operations, logical operations, mathematical operations, history, relative measurements

Decoding

I2C, SPI, UART / RS232, CAN, LIN

Input / output 

USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Ext Trigger

Display

7-inch (800 × 480)

Power 

AC 100-240 V, 45 Hz - 440 Hz, 50 VA max.

Frequency range

from 20 Hz to 2 MHz

Test signal level

0 to 2 V (RMS) / 0 to 20 mA (RMS)
From 0 to 2 V (RMS) / from 0 to 100 mA (RMS) 1

Auto level control

+

DC offset function

Built-in, 1.5; 2 V ± 40 V

DC source

± 10 V

Programmable sweep in list mode

201 points

Remote control

GPIB

Management via web browser

+

Management commands

Compatible with 4284A

Basic accuracy

0.1% ("short" mode)
0.05% ("medium", "long" mode)

Parameters

Cp-D/Q/G/Rp, Cs-D/Q/Rs, Lp-D/Q/G/Rp, Ls-D/Q/Rs, R-X, Z-0d/0r, G-B, Y-0d/0r Lp-Rdc , Ls-Rdc , Vdc-Idc 

Measurement time mode Model

Standard (E4980A) 

Simplified (E4980A-005)

(Short / Medium)

330 ms / 380 ms  

20 Hz 

1040 ms / 1150 ms 

20 Hz

100 ms / 180 ms 100 Hz 

240 ms / 380 ms 

100 Hz

20 ms / 110 ms 

1 kHz 

37 ms / 200 ms 

1 kHz

7.7 ms / 92 ms 

10 kHz 

25 ms / 180 ms 

10 kHz

5.7 ms / 89 ms 

100 kHz 

23 ms / 180 ms 

100 kHz

5.6 ms / 88 ms 

1 MHz 

23 ms / 180 ms 

1 MHz

5.6 ms / 88 ms 

2 MHz 

23 ms / 180 ms 

2 MHz

Storage devices

Internal / USB memory

Bandwidth

60 MHz

Number of channels

2

Sampling frequency

1 GS/ s

Vertical resolution

12 bits

Depth of memory

40 MB

Oscillogram recording

45,000 oscillograms / sec

Rise time (input, default)

≤5.8 ns

Horizontal scale

2 ns / div- 1000 s / div

Input impedance

1 mOhm ± 2%, in parallel with 15 pF ± 5 pF

Max. input voltage

1 mOhm ≤ 300 Vskz;

Measurement error

±1%

DC error

average ≥16 ： ± （ 3% +0.05 div) for △ V

Correlation by probe coefficient

0.001X - 1000X, steps 1 - 2 - 5

Woofer feedback (ace, -3 dB)

≥5 Hz

Interpolation

(sinx)/x，x

Login modes 

DC, AC, GND

Vertical sensitivity

1 mV / div- 10 V / div(at input)

Start types

Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (optional)

Bus decoding

I2C, SPI, RS232, CAN

Start modes

Auto, Normal, Single

Vertical range

± 2V (1mV / div～ 50mV / div) ； ± 20V (100mV / div～ 1V / div) ； ± 200V (2V / div～ 10V / div)

Mathematical functions

Line / field frequency (video)

NTSC, PAL and SECAM standards

Cursor measurements

△ V, and △ T between cursors, △ V and △ T between cursors, and autocursors

Automatic measurements

Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase A→B ↑, Phase A→B↓, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area

Storage of oscillograms

100 oscillograms

Interfaces

USB host, USB device, Trig Out (P / F), LAN, VGA (optional)

Display

8 "color LCD, 800 x 600 pixels

Power

100 V - 240 V AC, 50/60 Hz, CAT II

Battery

3.7 V, 13200 mA

Dimensions

340 × 177 × 90 mm

Bandwidth

200 MHz

Number of channels

2

Sampling frequency

2.4 GW / s (2X interpolation)

Vertical resolution

16 bit

The length of an arbitrary signal

2 ~ 20 MB

Frequency meter

up to 400 MHz

Max. Amplitude

20 Vpp <40 MHz

Interface

Standard: USB Host, USB Device, LAN
Optional: GPIB (USB-GPIB adapter)

Display

Touch 4.3 ”display, 480 × 272 RGB

Spectral range, nm

450 – 1000

Spectral resolution, nm

better than 3

Light source

combined
(halogen lamp and blue diode)

Measurement time, sec

<1 to 10

The size of the analytical spot, microns

75 x 150; 100 x 250; 100 x 500;
150 x 150; 250 x 250; 250 x 500; 500 x 500

Angle of incidence, deg

from 45 to 90 with step 5

Sample size, mm

up to 200

Adjusting of the sample position

manual, 17 mm in height and inclination

Measurement quality:

Accuracy (directly through the county)

Ψ=450±0,050; Δ=00±0,20

Accuracy (thickness on oxide 1000 angstroms)

0,04%

Reproducibility (thickness on the oxide 1000 angstroms)

±0,02%

Dimensions (LxWxH), cm

100 x 46 x 23

Specifications

Range

Frequency

Basic error
% of value

 +% of range

 DC voltage

600 mV
6 B
60 V
600 V
1000 V

0,02%+0,01%

0,02%+0,01%

0,02%+0,01%

0,02%+0,01%

 AC voltage (TrueRMS)

600 mV
6 B
60 V
600 V
750 V

20 Hz - 45 Hz

2,0%+0,10%

45 Hz - 20 kHz

0,2%+0,06%

20 kHz - 50 kHz

1,0%+0,05%

50 kHz - 100 kHz

3,0%+0,08%

 DC current

600.00 μA
6.0000 mA
60,000 mA
600.00 mA
6,0000 A
10,000 A

0,06%+0,02%
0,06%+0,02%
0,1%+0,05%
0,2%+0,02%
0,2%+0,05%
0,25%+0,05%

 AC current (TrueRMS )

60,000 mA
600.00 mA
6,0000 A
10,0000 A

20 Hz - 45 Hz

2,0%+0,10%

45 Hz-2 kHz

0,50%+0,10%

2 kHz-10 kHz

2,5%+0,20%

 Resistance

600.00 Ohm
6.0000 kО
60,000 kО
600.00 kО
6.0000 MО
60,000 Mм
100.00 MО

0,040%+0,01%
0,030%+0,01%
0,030%+0,01%
0,040%+0,01%
0,120%+0,03%
0,90%+0,03%
1,75%+0,03%

 Frequency ( 200mV-750V )

20 Hz - 2 kHz
2 kHz - 20 kHz
20 kHz - 200 kHz
200 kHz - 1 MHz

0,01%+0,003%
0,01%+0,003%
0,01%+0,003%
0,01%+0,006%

Frequency (20mA-10V)

20 Hz - 2 kHz
2 kHz - 10 kHz

0,01%+0,003%
0,01%+0,003%

 Capacity

2,000 nF
20.00 nF
200.0 n F
2,000 uF
200.0 uF
1000 uF

200 nA
200 nA
2 μA
10 μA
100 μA
1 mA

3,0%+1,0%
1,0%+0,5%
1,0%+0,5%
1,0%+0,5%
1,0%+0,5%
2,0%+0,5%

Number of channels

CH1 ： 0 ～ 32 V ， 0 ～ 3.2 A
CH2 ： 0 ～ 32 V ， 0 ～ 3.2 A
CH3 ： 2.5 / 3.3 / 5.0 V ， 3.2 A

Voltage range

CH1: voltage: from 0 to 32V; current: from 0 to 3.2A
CH2: voltage: from 0 - 32V; current: from 0 to 3.2A
CH3: voltage: 2.5 / 3.3 / 5.0 B; current: up to 3.2A

Maximum output power

220 W.

Minimum voltage and current resolution

1 mV, 1 mA

Installation accuracy

voltage: ± (0.03% + 10mV) current: ± (0.3% + 10mA)

Display accuracy

voltage: ± (0.03% + 10mV) current: ± (0.3% + 10mA)

Voltage stabilization

power supply effect: <0.01% + 3mV
load effect: <0.01% + 3mV
ripple and noise: <1 mV RMS. (5 Hz - 1 MHz)
recovery time: 50 μs (load change by 50%, minimum 0.5A)

Current stabilization

power effect: <0.2% + 3mA
load effect: <0.2% + 3mA
ripple and noise: <3 mA RMS

Display

4.3 "TFT-LCD; bit size: 480 x 272

Bit size of the display

5-bit voltage display; 

4-bit current display

Noise level

≤1 mVrms (5 Hz - 1 MHz)

Standard interfaces

LAN, USB Device

Power

AC 100V / 120V / 220V / 230V ± 10%; 50/60 Hz

Memory

5 previous settings

Dimensions

225 × 143 × 278 mm

Number of channels

2 (adjustable)

1 (adjustable)

Power outputs

voltage

from 0 to 30 V (independent / parallel)
from 0 to 60 V (in series)

from 0 to 6 V

current

from 0 to 3 A (independent / sequential)
from 0 to 6A (parallel)

from 0 to 3 A

Power settings

voltage

≤0.01% + 3 mV

≤0.01% + 3 mV

current

≤0.01% + 3 mA

≤0.01% + 3 mA

Load settings

voltage

≤0.01% + 3 mV

≤0.01% + 3 mV

current

≤0.01% + 3 mA

≤0.01% + 3 mA

Ripples and noise 

(20 Hz - 20 MHz)

voltage

≤1 mV RMS.

≤1 mV RMS.

current

≤5 mA RMS.

≤4 mA RMS.

Installation resolution

voltage

1 mV

-

current

1 mA

-

Installation error

voltage

≤0.05% + 3 mV

-

current

≤0.1% + 3 mA

-

Measurement resolution

voltage

1 mV (<10 V), 10 mV (> 10 V)

-

current

1 mA

-

Measurement error

voltage

≤0.03% + 10 e.m.r.

≤0.03% + 10 e.m.r.

current

≤0,1%+8 е.м.р.

≤0,1%+5 е.м.р.

Display

TFT 4 ", 480 × 320, 65536 colors

Dimensions

250 x 158 x 358 mm 

Parameters

Value

Accelerated mode of capturing SWIFT spectra

yes, with a motorized table 

Confocal mapping

0.5 μm XY

Automation of basic operations

OneClick procedure

Optical microscope

direct

Spectral resolution on lattices 600, 1200, 1800, 2400,

2… 8 cm-1 

Wavelengths of excitation lasers

532, 638, 785 nm

Sample dimensions

(5 ÷ 10 mm) x (5 ÷ 10 mm) x (0.2 ÷ 2 mm)

drift AFM on XY 

2 nm / min

Parameters

Value

Interferometer

Michelson type with an angle of incidence of 300, equipped with an improved system

dynamic adjustment, sealed (with indication of humidity

Optical system

One-beam

Light dividers

KBr plate with germanium coating for medium IR range 

Irradiation source

Highly stable He-Ne laser;

Highly stable high-energy ceramic source of medium and far IR range 

Detector

Thermostabilized DLATGS for medium and far IR range 

Spectral range of wave numbers

7800–350 cm-1 

Accuracy of determination of wave numbers 

better than 0.01 cm-1

Resolution

• 0.25; 0.5; 1; 2; 4; 8; 16 cm-1 (middle and far IR range)

• 2; 4; 8; 16 cm-1 (close IR range)

Signal to noise ratio

60000: 1 and above (4 cm-1, 1 min, 2200 cm-1, peak to peak)

The speed of movement of the mirror

2; 2.8; 5; 9; 10; 20; 30 or 40 mm / min

Ditch compartment

200 x 230 x 170 mm, with automatic prefix recognition

Software

LabSolutions IR with a built-in library containing about 12,000 spectra of different classes of compounds